Talk to Our Pump Engineers
Tell us your slurry, flow and head — our engineers reply within 24 hours.
Tell us the slurry, not just the flow and head — a duty point on its own cannot be selected against. Send the six items below with your first message and the first reply will be a selection rather than a request for more information.
- Engineers reply within 24 hours
- Manufacturer, not a trading company — four production bases
- MOQ 1 set; standard models in stock despatch in 7–10 days
- T/T, L/C and O/A; fumigation-free wooden cases
- Third-party inspection accepted
- Pumps in service in more than 100 countries
CE · EAC · ISO 9001 · ISO 14001 · ISO 45001
What We Need to Size a Pump
Six items turn an enquiry into a selection. If you have four of them, send four — we will tell you which of the rest actually matters for your case.
| Flow and head | Design point, plus the range the pump must cover |
|---|---|
| The medium | What it is, and its temperature |
| Particle size | Largest solid and, if known, the size distribution. The largest solid sets the pump size |
| Solids concentration | By weight, and the density that follows from it |
| pH | Decides the wear material before abrasion does |
| Drive and power supply | Voltage, frequency, and whether speed control is available |
If you are replacing an installed pump, add the existing baseplate and flange details — we will confirm whether a direct replacement is possible before you order.
Send Your Enquiry
Who Picks Up Your Enquiry
Technical enquiries go to an engineer, not to a sales desk that forwards them. Our core engineering team is 85 people averaging 15 years in the industry, and they work in the same site as the foundry, the machining shop and the test bench — which is why an answer about a material or a clearance can be checked rather than estimated.
If You Are Buying to Resell
Distributors and project integrators are supported with dimensional drawings for pre-order fit checking, parts manufactured against drawing or sample, and long-term parts supply for installed fleets. OEM and private-label supply is available; scope and conditions are confirmed at enquiry.
Commercial Terms at a Glance
| Minimum order | 1 set |
|---|---|
| Lead time | Standard models in stock 7–10 days; other models within 30 days |
| Payment | T/T, L/C, O/A |
| Packing | Fumigation-free wooden cases |
| Inspection | Third-party inspection accepted; arrange with the order |
| Testing | Every pump performance-tested before despatch; report issued with the order |
Company Details
| Company | Shanglishi Group (Shijiazhuang) Pump Technology Co., Ltd |
|---|---|
| Established | 1994 |
| Address | South side of the eastern section of Xinhe Street, Xingtang County Economic Development Zone (South District), Shijiazhuang, Hebei, China 050600 |
| mavis@shanglishigroup.com | |
| Tel / WhatsApp | +86 15830676372 |
| Support hours | 7 × 24 |
Inside Our Works
How quickly will I get a reply?
Within 24 hours. Sending the slurry analysis with the first message means the first reply can be a selection rather than a request for more detail.
What if I only know flow and head?
Send what you have. Flow and head alone cannot settle a selection — particle size and pH usually matter more — but we will tell you which missing items actually affect your case.
Do you quote prices on the website?
No. Pricing depends on model, wet-end material, quantity and destination, so it is quoted against a specific enquiry.
Can I visit the factory?
Yes. Tell us when you plan to travel and we will arrange it.
Do you accept third-party inspection?
Yes. Arrange the inspection body with the order and we will schedule the works test accordingly.
