Froth Pump Air Lock: How an SAHF Froth Pump Handles Froth
Froth is hard to get into a pump. Here is how the intake, an open impeller and the SAHF hopper help, how to size on froth flow, and what to send us.
Applications
SG or SGH? Choosing a Gravel Sand Pump by the Head You Need
SG or SGH? Compare head, flow and speed across six SG and SGH gravel sand pump models, learn to read the model code, and see what to send us for a quote.
Applications
Vertical Sump Pump for Slurry: Inlet, Length, Wet End and Drive
A vertical sump pump for slurry has to handle abrasive, coarse, concentrated solids. With our SSP(R), four things need settling before you order: inlet, length, metal or rubber, and drive.
Equipment Ranges
Vertical Centrifugal Slurry Pump: Which of Our Three Series, and When Not to Go Vertical
Our vertical centrifugal slurry pump comes in three series: metal SSP, rubber-lined SSPR and high-chrome SZPL. Here is what each one covers, where our range stops, and what to send us for a quote.
Applications
Mining Submersible Pump: What Keeps an SZBQ Running in Slurry
A submersible slurry pump lasts as long as its motor. Our SZBQ guards it with an overheat element, a leak probe, a float switch and a bearing temperature device. Outlets run from 50 to 600 mm; send us your duty and we will size one for your mine.
Sealing & Parts
Slurry Pump Shaft Seal Types: How to Choose Between Three
Our horizontal slurry pumps take three shaft seal types. Which one fits depends on the pressure at the pump inlet, your seal water supply and whether the process can take any dilution.
Sealing & Parts
A Vertical Slurry Pump Without Seal Water: What the SZPL Covers
The SZPL is a vertical slurry pump with no shaft seal, so it needs no seal water. This guide covers its sizes, flows and heads, how it is built, and when a sealed horizontal pump is the better choice.
Materials & Wear
Ceramic Slurry Pump: For Slurry That Wears and Corrodes
A ceramic slurry pump pays off where slurry wears and corrodes the wet end at the same time. Silicon carbide stands up to almost all acids and alkalis; the two exceptions are hydrofluoric acid and hot concentrated alkali. For a quote on our SAZP range, send us your duty.
Applications
Choosing a Sand Dredge Pump: Start With the Stones
On a sand dredging line the top particle size decides the model, not the flow rate. Our WN series passes 144 to 354 mm. This guide covers the full model range, why the larger pumps use a double casing, and the six numbers we need to size yours.
Materials & Wear
Choosing a Tailings Pump: Size Is the Easy Part
Sizing a tailings pump is the straightforward part. The material decides how long the wet end lasts. We match the high-chrome grade to your pH and particle size, and we need five numbers from you before we quote.